dmesg - Intel Xeon 5110

Return To Intel Xeon 5110 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-514.26.2.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-11) (GCC) ) #1 SMP Tue Jul 4 15:04:05 UTC 2017
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000967ff] usable
BIOS-e820: [mem 0x0000000000096800-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009f919fff] usable
BIOS-e820: [mem 0x000000009f91a000-0x000000009f9d0fff] ACPI NVS
BIOS-e820: [mem 0x000000009f9d1000-0x000000009fa31fff] usable
BIOS-e820: [mem 0x000000009fa32000-0x000000009fa99fff] reserved
BIOS-e820: [mem 0x000000009fa9a000-0x000000009fad4fff] usable
BIOS-e820: [mem 0x000000009fad5000-0x000000009fb19fff] ACPI NVS
BIOS-e820: [mem 0x000000009fb1a000-0x000000009fb26fff] usable
BIOS-e820: [mem 0x000000009fb27000-0x000000009fb39fff] ACPI data
BIOS-e820: [mem 0x000000009fb3a000-0x000000009fbfffff] usable
BIOS-e820: [mem 0x000000009fc00000-0x00000000afffffff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffc0bfff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000025fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: Intel S5000PSL/S5000PSL, BIOS S5000.86B.12.00.0098.062320091136 06/23/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x260000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FE0000000 write-back
  2 base 09FC00000 mask FFFC00000 uncachable
  3 base 100000000 mask F00000000 write-back
  4 base 200000000 mask E00000000 write-back
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2556MB, range: 4MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
total RAM covered: 14844M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 16G 	num_reg: 4  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 2556MB, range: 4MB, type UC
reg 2, base: 2560MB, range: 512MB, type UC
reg 3, base: 3GB, range: 1GB, type UC
e820: update [mem 0x9fc00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x9fc00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fdc00-0x000fdc0f] mapped at [ffff8800000fdc00]
Base memory trampoline at [ffff880000090000] 90000 size 24576
BRK [0x01fa3000, 0x01fa3fff] PGTABLE
BRK [0x01fa4000, 0x01fa4fff] PGTABLE
BRK [0x01fa5000, 0x01fa5fff] PGTABLE
BRK [0x01fa6000, 0x01fa6fff] PGTABLE
BRK [0x01fa7000, 0x01fa7fff] PGTABLE
BRK [0x01fa8000, 0x01fa8fff] PGTABLE
RAMDISK: [mem 0x35c87000-0x36e3bfff]
ACPI: RSDP 00000000000f0410 00024 (v02 INTEL )
ACPI: XSDT 000000009fb39120 0007C (v01 INTEL  S5000PSL 00000000 INTL 01000013)
ACPI: FACP 000000009fb37000 000F4 (v03 INTEL  S5000PSL 00000000 INTL 01000013)
ACPI: DSDT 000000009fb30000 05809 (v02 INTEL  S5000PSL 00000001 INTL 01000013)
ACPI: FACS 000000009fad5000 00040
ACPI: APIC 000000009fb36000 000C8 (v01 INTEL  S5000PSL 00000000 INTL 01000013)
ACPI: SPCR 000000009fb2f000 00050 (v01 INTEL  S5000PSL 00000000 INTL 01000013)
ACPI: HPET 000000009fb2e000 00038 (v01 INTEL  S5000PSL 00000001 INTL 01000013)
ACPI: MCFG 000000009fb2d000 0003C (v01 INTEL  S5000PSL 00000001 INTL 01000013)
ACPI: SSDT 000000009fb2c000 00193 (v02  INTEL IPMI     00004000 INTL 20060317)
ACPI: SSDT 000000009fb2b000 002D4 (v02  INTEL CST      00004000 INTL 20060317)
ACPI: HEST 000000009fb2a000 000A8 (v01 INTEL  S5000PSL 00000001 INTL 00000001)
ACPI: BERT 000000009fb29000 00030 (v01 INTEL  S5000PSL 00000001 INTL 00000001)
ACPI: ERST 000000009fb28000 00230 (v01 INTEL  S5000PSL 00000001 INTL 00000001)
ACPI: EINJ 000000009fb27000 00130 (v01 INTEL  S5000PSL 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000025fffffff]
Initmem setup node 0 [mem 0x00000000-0x25fffffff]
  NODE_DATA [mem 0x25ffd2000-0x25fff8fff]
Reserving 161MB of memory at 688MB for crashkernel (System RAM: 8186MB)
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x25fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x00095fff]
  node   0: [mem 0x00100000-0x9f919fff]
  node   0: [mem 0x9f9d1000-0x9fa31fff]
  node   0: [mem 0x9fa9a000-0x9fad4fff]
  node   0: [mem 0x9fb1a000-0x9fb26fff]
  node   0: [mem 0x9fb3a000-0x9fbfffff]
  node   0: [mem 0x100000000-0x25fffffff]
On node 0 totalpages: 2095646
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3989 pages, LIFO batch:0
  DMA32 zone: 10155 pages used for memmap
  DMA32 zone: 649865 pages, LIFO batch:31
  Normal zone: 22528 pages used for memmap
  Normal zone: 1441792 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x85] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x87] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00096000-0x00096fff]
PM: Registered nosave memory: [mem 0x00097000-0x000fffff]
PM: Registered nosave memory: [mem 0x9f91a000-0x9f9d0fff]
PM: Registered nosave memory: [mem 0x9fa32000-0x9fa99fff]
PM: Registered nosave memory: [mem 0x9fad5000-0x9fb19fff]
PM: Registered nosave memory: [mem 0x9fb27000-0x9fb39fff]
PM: Registered nosave memory: [mem 0x9fc00000-0xafffffff]
PM: Registered nosave memory: [mem 0xb0000000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffc0bfff]
PM: Registered nosave memory: [mem 0xffc0c000-0xffffffff]
e820: [mem 0xb0000000-0xffbfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88025fc00000 s96728 r8192 d30248 u262144
pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2062878
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 4447884k/9961472k available (6768k kernel code, 1578888k absent, 397736k reserved, 4445k data, 1684k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=8.
NR_IRQS:327936 nr_irqs:896 0
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1595.956 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.91 BogoMIPS (lpj=1595956)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 4096
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 25817 entries in 101 pages
smpboot: Max logical packages: 4
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU            5110  @ 1.60GHz (fam: 06, model: 0f, stepping: 06)
Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
core: PEBS disabled due to CPU errata
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
smpboot: CPU 1 Converting physical 3 to logical package 1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node   0, Processors  #1 #2 #3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (12767.60 BogoMIPS)
node 0 initialised, 884241 pages in 47ms
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x9f91a000-0x9f9d0fff] (749568 bytes)
PM: Registering ACPI NVS region [mem 0x9fad5000-0x9fb19fff] (282624 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xa0000000-0xafffffff] (base 0xa0000000)
PCI: MMCONFIG at [mem 0xa0000000-0xafffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xa0000000-0xa0200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI Error: Field [CPB3] at 96 exceeds Buffer [NULL] size 64 (bits) (20130517/dsopcode-236)
ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff88017cc6ecf8), AE_AML_BUFFER_LIMIT (20130517/psparse-536)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: host bridge window [io  0x0ca2] (ignored, not CPU addressable)
acpi PNP0A03:00: host bridge window [io  0x0ca3] (ignored, not CPU addressable)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0ca1 window]
pci_bus 0000:00: root bus resource [io  0x0ca4-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfdffffff window]
pci_bus 0000:00: root bus resource [mem 0xfe700000-0xfe7003ff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci 0000:00:00.0: [8086:25d8] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:25f7] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:25e3] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:25f8] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:25e5] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [8086:25f9] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [8086:25e7] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [8086:1a38] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xfe700000-0xfe7003ff 64bit]
pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [8086:25f0] type 00 class 0x060000
pci 0000:00:10.1: [8086:25f0] type 00 class 0x060000
pci 0000:00:10.2: [8086:25f0] type 00 class 0x060000
pci 0000:00:11.0: [8086:25f1] type 00 class 0x060000
pci 0000:00:13.0: [8086:25f3] type 00 class 0x060000
pci 0000:00:15.0: [8086:25f5] type 00 class 0x060000
pci 0000:00:16.0: [8086:25f6] type 00 class 0x060000
pci 0000:00:1c.0: [8086:2690] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2688] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0x4080-0x409f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2689] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0x4060-0x407f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:268a] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0x4040-0x405f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:268b] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io  0x4020-0x403f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:268c] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xb8c00400-0xb8c007ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:2670] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2680] type 00 class 0x01018a
pci 0000:00:1f.2: reg 0x10: [io  0x40b8-0x40bf]
pci 0000:00:1f.2: reg 0x14: [io  0x40c4-0x40c7]
pci 0000:00:1f.2: reg 0x18: [io  0x40b0-0x40b7]
pci 0000:00:1f.2: reg 0x1c: [io  0x40c0-0x40c3]
pci 0000:00:1f.2: reg 0x20: [io  0x40a0-0x40af]
pci 0000:00:1f.2: reg 0x24: [mem 0xb8c00000-0xb8c003ff]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:269b] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io  0x4000-0x401f]
pci 0000:01:00.0: [8086:3500] type 01 class 0x060400
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.3: [8086:350c] type 01 class 0x060400
pci 0000:01:00.3: PME# supported from D0 D3hot D3cold
pci 0000:01:00.3: System wakeup disabled by ACPI
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:02.0: PCI bridge to [bus 01-06]
pci 0000:00:02.0:   bridge window [io  0x2000-0x3fff]
pci 0000:00:02.0:   bridge window [mem 0xb8000000-0xb8afffff]
pci 0000:02:00.0: [8086:3510] type 01 class 0x060400
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:02:01.0: [8086:3514] type 01 class 0x060400
pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
pci 0000:02:01.0: System wakeup disabled by ACPI
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:02:02.0: [8086:3518] type 01 class 0x060400
pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
pci 0000:02:02.0: System wakeup disabled by ACPI
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:01:00.0: PCI bridge to [bus 02-05]
pci 0000:01:00.0:   bridge window [io  0x2000-0x3fff]
pci 0000:01:00.0:   bridge window [mem 0xb8000000-0xb89fffff]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [1000:0057] type 00 class 0x010000
pci 0000:04:00.0: reg 0x10: [io  0x3000-0x30ff]
pci 0000:04:00.0: reg 0x14: [mem 0xb8910000-0xb8913fff 64bit]
pci 0000:04:00.0: reg 0x1c: [mem 0xb8900000-0xb890ffff 64bit]
pci 0000:04:00.0: reg 0x30: [mem 0xffe00000-0xffffffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:02:01.0: PCI bridge to [bus 04]
pci 0000:02:01.0:   bridge window [io  0x3000-0x3fff]
pci 0000:02:01.0:   bridge window [mem 0xb8900000-0xb89fffff]
pci 0000:05:00.0: [8086:1096] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xb8820000-0xb883ffff]
pci 0000:05:00.0: reg 0x14: [mem 0xb8400000-0xb87fffff]
pci 0000:05:00.0: reg 0x18: [io  0x2020-0x203f]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.1: [8086:1096] type 00 class 0x020000
pci 0000:05:00.1: reg 0x10: [mem 0xb8800000-0xb881ffff]
pci 0000:05:00.1: reg 0x14: [mem 0xb8000000-0xb83fffff]
pci 0000:05:00.1: reg 0x18: [io  0x2000-0x201f]
pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:02:02.0: PCI bridge to [bus 05]
pci 0000:02:02.0:   bridge window [io  0x2000-0x2fff]
pci 0000:02:02.0:   bridge window [mem 0xb8000000-0xb88fffff]
pci 0000:01:00.3: PCI bridge to [bus 06]
pci 0000:00:03.0: PCI bridge to [bus 07]
pci 0000:00:04.0: PCI bridge to [bus 08]
pci 0000:00:05.0: PCI bridge to [bus 09]
pci 0000:00:06.0: PCI bridge to [bus 0a]
pci 0000:00:07.0: PCI bridge to [bus 0b]
pci 0000:00:1c.0: PCI bridge to [bus 0c]
pci 0000:0d:0c.0: [1002:515e] type 00 class 0x030000
pci 0000:0d:0c.0: reg 0x10: [mem 0xb0000000-0xb7ffffff pref]
pci 0000:0d:0c.0: reg 0x14: [io  0x1000-0x10ff]
pci 0000:0d:0c.0: reg 0x18: [mem 0xb8b00000-0xb8b0ffff]
pci 0000:0d:0c.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:0d:0c.0: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1e.0:   bridge window [mem 0xb8b00000-0xb8bfffff]
pci 0000:00:1e.0:   bridge window [mem 0xb0000000-0xb7ffffff 64bit pref]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0ca1 window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0ca4-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000fffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xb0000000-0xfdffffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfe700000-0xfe7003ff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11)
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI: Enabled 2 GPEs in block 20 to 3F
vgaarb: device added: PCI:0000:0d:0c.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:0d:0c.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00096800-0x0009ffff]
e820: reserve RAM buffer [mem 0x9f91a000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9fa32000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9fad5000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9fb27000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9fc00000-0x9fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xa0000000-0xafffffff] has been reserved
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:00: [mem 0xfe600000-0xfe6fffff] has been reserved
system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io  0x0500-0x053f] has been reserved
system 00:02: [io  0x0400-0x047f] could not be reserved
system 00:02: [io  0x0800-0x087f] has been reserved
system 00:02: [io  0x0ca0-0x0caf] could not be reserved
system 00:02: [io  0x0161] has been reserved
system 00:02: [io  0x0162] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 7 devices
ACPI: bus type PNP unregistered
pci 0000:04:00.0: can't claim BAR 6 [mem 0xffe00000-0xffffffff pref]: no compatible bridge window
pci 0000:0d:0c.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 0c] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0c] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0c] add_size 200000 add_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xb8d00000-0xb8efffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xb8f00000-0xb90fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x5000-0x5fff]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:04:00.0: BAR 6: no space for [mem size 0x00200000 pref]
pci 0000:04:00.0: BAR 6: failed to assign [mem size 0x00200000 pref]
pci 0000:02:01.0: PCI bridge to [bus 04]
pci 0000:02:01.0:   bridge window [io  0x3000-0x3fff]
pci 0000:02:01.0:   bridge window [mem 0xb8900000-0xb89fffff]
pci 0000:02:02.0: PCI bridge to [bus 05]
pci 0000:02:02.0:   bridge window [io  0x2000-0x2fff]
pci 0000:02:02.0:   bridge window [mem 0xb8000000-0xb88fffff]
pci 0000:01:00.0: PCI bridge to [bus 02-05]
pci 0000:01:00.0:   bridge window [io  0x2000-0x3fff]
pci 0000:01:00.0:   bridge window [mem 0xb8000000-0xb89fffff]
pci 0000:01:00.3: PCI bridge to [bus 06]
pci 0000:00:02.0: PCI bridge to [bus 01-06]
pci 0000:00:02.0:   bridge window [io  0x2000-0x3fff]
pci 0000:00:02.0:   bridge window [mem 0xb8000000-0xb8afffff]
pci 0000:00:03.0: PCI bridge to [bus 07]
pci 0000:00:04.0: PCI bridge to [bus 08]
pci 0000:00:05.0: PCI bridge to [bus 09]
pci 0000:00:06.0: PCI bridge to [bus 0a]
pci 0000:00:07.0: PCI bridge to [bus 0b]
pci 0000:00:1c.0: PCI bridge to [bus 0c]
pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.0:   bridge window [mem 0xb8d00000-0xb8efffff]
pci 0000:00:1c.0:   bridge window [mem 0xb8f00000-0xb90fffff 64bit pref]
pci 0000:0d:0c.0: BAR 6: assigned [mem 0xb8b20000-0xb8b3ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d]
pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1e.0:   bridge window [mem 0xb8b00000-0xb8bfffff]
pci 0000:00:1e.0:   bridge window [mem 0xb0000000-0xb7ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0ca1 window]
pci_bus 0000:00: resource 5 [io  0x0ca4-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000fffff window]
pci_bus 0000:00: resource 9 [mem 0xb0000000-0xfdffffff window]
pci_bus 0000:00: resource 10 [mem 0xfe700000-0xfe7003ff window]
pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:01: resource 0 [io  0x2000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xb8000000-0xb8afffff]
pci_bus 0000:02: resource 0 [io  0x2000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xb8000000-0xb89fffff]
pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0xb8900000-0xb89fffff]
pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:05: resource 1 [mem 0xb8000000-0xb88fffff]
pci_bus 0000:0c: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:0c: resource 1 [mem 0xb8d00000-0xb8efffff]
pci_bus 0000:0c: resource 2 [mem 0xb8f00000-0xb90fffff 64bit pref]
pci_bus 0000:0d: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:0d: resource 1 [mem 0xb8b00000-0xb8bfffff]
pci_bus 0000:0d: resource 2 [mem 0xb0000000-0xb7ffffff 64bit pref]
pci_bus 0000:0d: resource 4 [io  0x0000-0x0ca1 window]
pci_bus 0000:0d: resource 5 [io  0x0ca4-0x0cf7 window]
pci_bus 0000:0d: resource 6 [io  0x0d00-0xffff window]
pci_bus 0000:0d: resource 7 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:0d: resource 8 [mem 0x000c0000-0x000fffff window]
pci_bus 0000:0d: resource 9 [mem 0xb0000000-0xfdffffff window]
pci_bus 0000:0d: resource 10 [mem 0xfe700000-0xfe7003ff window]
pci_bus 0000:0d: resource 11 [mem 0xfed40000-0xfed44fff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
pci 0000:0d:0c.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 18132k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x9b91a000-0x9f91a000] (64MB) mapped at [ffff88009b91a000-ffff88009f919fff]
sha1_ssse3: Using SSSE3 optimized SHA-1 implementation
sha256_ssse3: Using SSSE3 optimized SHA-256 implementation
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1499948763.786:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15630
Key type big_key registered
SELinux:  Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xb8c00400
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-514.26.2.el7.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.0-514.26.2.el7.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 22, io base 0x00004060
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.10.0-514.26.2.el7.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 23, io base 0x00004040
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.10.0-514.26.2.el7.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 22, io base 0x00004020
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.10.0-514.26.2.el7.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
microcode: CPU0 sig=0x6f6, pf=0x4, revision=0xcd
microcode: CPU1 sig=0x6f6, pf=0x4, revision=0xcd
microcode: CPU2 sig=0x6f6, pf=0x4, revision=0xcd
microcode: CPU3 sig=0x6f6, pf=0x4, revision=0xcd
microcode: Microcode Update Driver: v2.01 , Peter Oruba
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Loaded X.509 cert 'CentOS Linux kernel signing key: 618f5ddf772e4be825fb1bb09591862724ed1e97'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:01: setting system clock to 2017-07-13 12:26:04 UTC (1499948764)
Freeing unused kernel memory: 1684k freed
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Journal Service...
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started Journal Service.
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [
 P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x40a0 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x40a8 irq 15
ata2.00: ATA-8: INTEL SSDSA2CT040G3, 4PC10302, max UDMA/133
ata2.00: 78165360 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      INTEL SSDSA2CT04 0302 PQ: 0 ANSI: 5
ata2.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: Enabling discard_zeroes_data
 sda: sda1 sda2 sda3
ata2.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sda] Attached SCSI disk
SGI XFS with ACLs, security attributes, no debug enabled
XFS (sda3): Mounting V5 Filesystem
XFS (sda3): Ending clean mount
systemd-journald[106]: Received SIGTERM from PID 1 (systemd).
type=1404 audit(1499948765.603:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 104872 rules.
SELinux: 2048 avtab hash slots, 104872 rules.
SELinux:  8 users, 14 roles, 4980 types, 301 bools, 1 sens, 1024 cats
SELinux:  91 classes, 104872 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
type=1403 audit(1499948765.983:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 388.724ms.
systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time.
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
systemd[1]: Relabelled /dev and /run in 25.170ms.
systemd-journald[365]: Received request to flush runtime journal from PID 1
ipmi message handler version 39.2
ipmi_si IPI0001:00: ipmi_si: probing via ACPI
ipmi_si IPI0001:00: [io  0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
dca service started, version 1.12.1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ioatdma: Intel(R) QuickData Technology Driver 4.00
ioatdma 0000:00:08.0: irq 25 for MSI/MSI-X
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0
EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
ipmi_si IPI0001:00: Found new BMC (man_id: 0x000157, prod_id: 0x0029, dev_id: 0x20)
ipmi_si IPI0001:00: IPMI kcs interface initialized
input: PC Speaker as /devices/platform/pcspkr/input/input3
sd 1:0:0:0: Attached scsi generic sg0 type 0
IPMI SSIF Interface driver
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000428-0x000000000000042b (\_SB_.PCI0.LPC_.TPM_.GPE0) (20130517/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000428-0x000000000000042b (\GPE0) (20130517/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000539-0x0000000000000539 (\_SB_.PCI0.LPC_.TPM_.GPLV) (20130517/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000539-0x0000000000000539 (\GPLV) (20130517/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000052f (\_SI_.SIOR) (20130517/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
PTP clock support registered
[drm] Initialized drm 1.1.0 20060810
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:05:00.0: irq 26 for MSI/MSI-X
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x4) 00:15:17:2f:ac:80
e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:05:00.0 eth0: MAC: 5, PHY: 5, PBA No: 301000-001
e1000e 0000:05:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:05:00.1: irq 27 for MSI/MSI-X
[drm] radeon kernel modesetting enabled.
e1000e 0000:05:00.1 eth1: (PCI Express:2.5GT/s:Width x4) 00:15:17:2f:ac:81
e1000e 0000:05:00.1 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:05:00.1 eth1: MAC: 5, PHY: 5, PBA No: 301000-001
AMD IOMMUv2 driver by Joerg Roedel 
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
[drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x8086:0x3478 0x02).
[drm] register mmio base: 0xB8B00000
[drm] register mmio size: 65536
radeon 0000:0d:0c.0: VRAM: 128M 0x00000000B0000000 - 0x00000000B7FFFFFF (16M used)
radeon 0000:0d:0c.0: GTT: 512M 0x0000000090000000 - 0x00000000AFFFFFFF
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 16bits DDR
[TTM] Zone  kernel: Available graphics memory: 4002346 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 16M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCI GART of 512M enabled (table at 0x0000000035F80000).
radeon 0000:0d:0c.0: WB disabled
radeon 0000:0d:0c.0: fence driver on ring 0 use gpu addr 0x0000000090000000 and cpu addr 0xffff88009b194000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Loading R100 Microcode
kvm: disabled by bios
[drm] radeon: ring at 0x0000000090001000
[drm] ring test succeeded in 1 usecs
[drm] ib test succeeded in 0 usecs
[drm] No valid Ext TMDS info found in BIOS
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   VGA-1
[drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm]   Encoders:
[drm]     CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm]   DVI-D-1
[drm]   HPD2
[drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[drm]   Encoders:
[drm]     DFP2: INTERNAL_DVO1
kvm: disabled by bios
[drm] fb mappable at 0xB0040000
[drm] vram apper at 0xB0000000
[drm] size 786432
[drm] fb depth is 8
[drm]    pitch is 1024
fbcon: radeondrmfb (fb0) is primary device
kvm: disabled by bios
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.3: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.3: Using relative temperature scale!
intel_powerclamp: No package C-state available
intel_powerclamp: No package C-state available
Console: switching to colour frame buffer device 128x48
radeon 0000:0d:0c.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.43.0 20080528 for 0000:0d:0c.0 on minor 0
Adding 2098172k swap on /dev/sda2.  Priority:-1 extents:1 across:2098172k SSFS
XFS (sda1): Mounting V5 Filesystem
XFS (sda1): Ending clean mount
type=1305 audit(1499937967.593:4): audit_pid=466 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
microcode: CPU0 sig=0x6f6, pf=0x4, revision=0xcd
microcode: CPU0 updated to revision 0xd2, date = 2010-10-01
microcode: CPU1 sig=0x6f6, pf=0x4, revision=0xcd
microcode: CPU1 updated to revision 0xd2, date = 2010-10-01
microcode: CPU2 sig=0x6f6, pf=0x4, revision=0xcd
microcode: CPU2 updated to revision 0xd2, date = 2010-10-01
microcode: CPU3 sig=0x6f6, pf=0x4, revision=0xcd
microcode: CPU3 updated to revision 0xd2, date = 2010-10-01
e1000e 0000:05:00.0: irq 26 for MSI/MSI-X
e1000e 0000:05:00.0: irq 26 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): enp5s0f0: link is not ready
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
e1000e: enp5s0f0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
e1000e 0000:05:00.0 enp5s0f0: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0f0: link becomes ready
e1000e 0000:05:00.1: irq 27 for MSI/MSI-X
e1000e 0000:05:00.1: irq 27 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): enp5s0f1: link is not ready
e1000e: enp5s0f1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
e1000e 0000:05:00.1 enp5s0f1: Link Speed was downgraded by SmartSpeed
e1000e 0000:05:00.1 enp5s0f1: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0f1: link becomes ready
perf: interrupt took too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
perf: interrupt took too long (3148 > 3140), lowering kernel.perf_event_max_sample_rate to 63000
perf: interrupt took too long (3940 > 3935), lowering kernel.perf_event_max_sample_rate to 50000
conntrack: generic helper won't handle protocol 47. Please consider loading the specific helper module.
perf: interrupt took too long (4929 > 4925), lowering kernel.perf_event_max_sample_rate to 40000

Return To Intel Xeon 5110 System Information